WSB^®CPT-2030 is a concentrated “combination cycle” scale and corrosion inhibitor for steam boilers, operating in the congruent – coordinated phosphate/pH cycle (CPT).

WSB^®CPT-2030 is designed to provide protection in all types of boilers operating at medium and high pressures, up to 1800 psig.

Advantages 

WSB^®CPT-2030 is very effective in controlling boiler oxygen pitting, corrosion and boiler scaling and fouling. It provides excellent protection against carbonate scale and will disperse iron and other foulants in the boiler drum.

WSB^®CPT-2030 is a proprietary “combination cycle” boiler treatment. WSB^®CPT-2030 contains a special blend of phosphorous compounds, polymeric scale inhibitors, dispersants, chelants, and alkalinity builders in a single easily applied product.

WSB^®CPT-2030 offers much greater flexibility in dosage without over-treatment or under-treatment of a boiler system when compared to a typical phosphate cycle treatment program.

The balanced formulation of WSB^®CPT-2030 eliminates the over-concentration of Sodium Hydroxide under transfer boiling conditions, very common in high pressure boilers. So the undesirable caustic attack and the deterioration of the protective magnetite film is minimized.

The high buffer capacities of WSB^®CPT-2030 insures the system from acid excursions corrosion, especially when DEHA external oxygen scavenger is in use.

This makes it a much easier program to control, requiring significantly less testing

Being a CPT based treatment, WSB^®CPT-2030 is used and controlled under the CPT control diagrams, and according the instructions of the suppliers engineers.

WSB^®CPT-2030 is acceptable, without any restrictions, for treating boilers or steam lines where the low pressure steam produced, may contact edible products and/or cooling systems, where the treated water may contact edible products.

This is applicable in official establishments, operating under the US Federal meat, poultry, shell egg grading, and egg products inspection programs.